Cheap 5.75" Led Headlights for Harley Davidson VRSCD XG XL XR Dyna FLSTS FXCW Motorcycle Accessories

Sku: MS-5.7R-001-2
High Beam 45W 1770lm, low beam 30W 1350lm, no halo, drl or turn signal, cheapest price 5.75" Harley Davidson led headlights.
Share:
Description Review
Description
These 5.75" led headlights for Harley Davidson come with 6500K color temperature which closes to natural sunlight to improve the clarity of driving view and nncrease driving comfort. Well waterproof and dustproof performance. Durable housing case with good performance heat sink. High energy density and light intensity to expand the line of vision, increase safe driving conditions for you. Our 5.75" Harley Davidson led headlights have Low consumption, efficient, energy saving and environmental protection characteristics. High power on/off response time, Long service life for more than 50000 hours. Plug and play, easy installation, usually costs you around 15 minutes for installing. Fits for models VRSCD XG XL XR Dyna FLSTS FXCW etc which using 5.75 inch headlights. 

Specification of 5.75" Harley Davidson Led Headlight

 
Model Number MS-5.7R-001
Brand Morsun
Car Harley
Model Davidson
Dimension 5.75" led headlight
High Beam 1770LM
Low Beam 1350LM
Halo No
Color Temperature 6500K
Housing Material Die-cast aluminum housing
Housing Color Black/Chrome
Lens Material PC
Waterproof Rate IP67
Certifications IP67, CE, RoHS
Lifespan More than 50,000hrs
Warranty 12 Months

Product Images
 

   

Features

 
  • <=15 minutes installation.
  • Energy-Saving. More bright light out, less power in.
  • 100% die-cast Aluminum housing is good to Dissipate heat. 
  • IP67, better waterproof, dispelling fog inside from breather film.
 

Fitment


'06-'11 VRSCD
'06-'11 VRSCDX
'15-later XG
'04-later XL
'09-'13 XR
'91-later Dyna (except FLD and '91-'05 FXDWG)
'84-'99 FLSTS
'84-'99 FXSTS
'08-'11 FLSTSB
'05-'06 FLSTSC
'10-12 FLSTSE
'00-later FXCW, FXCWC, FXS, FXSB, FXSBSE, FXST, FXSTB, FXSTC and FXSTD
 

Advantages of 5.75 inch Motorcycle Led Headlight

 
  1. High Performance
    High quality advanced LED chips to provide 4 times brightness than the stock light, the built-in EMC provides a brighter and softer beam, and enjoys safe driving with our LED headlight
  2. High Energy Saving
    Reduced energy consumption by at least 50% (low energy consumption means low fuel consumption)
  3. Long Lifespan
    High quality LED chips have a long lifespan which is more than 50,000 hours
  4. Waterproof
    Highly sealed connector, waterproof rate IP67, anti-corrosion, protect the headlights from bad various environments
  5. Die-cast Housing
    Aluminum housing, corrosion resistant, fast heat dissipation to extended lamp lifespan
  6. Easy to install
    Plug and play, easy to install, does not damage the original car electrical system

Morsun Led Headlights are designed to use for aftermarket replacements for Jeep Wrangler and motorcycles, our high quality led headlights make sure your Jeep Wrangler and motorcycles are ready for the road and trails. These led headlights for Jeep Wrangler and motorcycles are built with shatterproof and waterproof IP67 projector lens, they can be used in a variety of environments.

We pride ourselves as one of the leading manufacturers and exporters of high quality led headlights for Jeep Wrangler and motorcycles with reasonable price.  With our high quality Jeep Wrangler led headlights our customers are getting a higher quality light output comparing with the original ones. In addition, the unique aluminum housing is designed to be waterproof, anti-corrosion and fast heat dissipation to extend the lifespan of the headlights. Our headlights have 12 months warranty which means we will provide our best service in warranty period so that you never need to worry about using our lights.
 

Quality Control


Led Headlights Quality Control from Morsun
 
  1. Raw material inspection
  2. Chip mounting
  3. Check PCB electrical parameters
  4. Put heat-conducting silicone grease and PCB into the housing
  5. 2 hours aging test of the semi-finished product
  6. Assembled optical component dust removal and cleaning
  7. Check electrical parameters and optical correction
  8. Assembling lens by machine
  9. Lens fixture
  10. 2 hours aging test and vacuum pumping to solve inside fog problem
  11. Laser logo
  12. Packing and shipping
 

Exhibition


Send your message to us