1990-2016 Land Rover Defender Indicator Lights 1983-1990 Land Rover Defender 90 110 Led Indicators LandRover Upgrade Kit

Our Land Rover Defender indicator lights come with 8 pcs in total with 4 light beam modes including 2 pcs daytime running light, 2 pcs front turn signals, 2 pcs rear turn signals and 2 pcs rear tail lights. This Land Rover Defender led indicators upgrade kit has well waterproof and dustproof performance, low consumption, efficient, energy saving and environmental protection feautres. The Defender led indicators increase safe driving conditions for you. High speed on/off response time, long service life for more than 30000 hours. Plug and play, easy installation, usually costs you around 20 minutes for installing. Fits for 1990-2016 Land Rover Defender, 1983-1990 Land Rover Defender 90/110.

 

Technical Parameters of Land Rover Defender Indicator Lights

 

Model Number	MS-LR9013
Brand	Morsun
Car	Land Rover
Model	Defender, Defender 90/110
Diameter	72.7mm/2.86inch
Depth	42.2mm/1.66inch
Wavelength(Turn Signals)	592nm
Wavelength(Stop/Tail)	621nm
Voltage	9V-16V
Power(DRL)	8.5W
Lumen(DRL)	380LM
Lumen(Turn Signals)	300LM
Lumen(Stop/Tail)	320LM
Outer Lens Material	PC
Housing Material	ABS Plastic
Warranty	12 Months

 

Features of Defender Led Indicators

The Certification - The Land Rover Defender indicator lights carry the European Union's E24-mark and therefore complies with Essential Safety Requirements.

Durable Construction - The steady housing made of strengthened PC lens and solid ABS plastic is impact scratch-resistant. Which it's strong enough to deal with all kinds of bad conditions. 

Mufti-function - Built with high-intensity led chips, these LandRover lights are brighter with minimized glare and light scattering that will make it easier for you to see what lies ahead without blinding the oncoming drivers against night and inclement weather.

Upgrade design - The Land Rover Defender led indicators flash a beautiful honeycomb pattern to give your car a new look. And on/off response time is faster, to ensure safe driving.

Easy to Install - Plug and play. Quick and easy fitting without any modifications. It only takes about 30 minutes to finish the installation.


Application

Advantages of Our Land Rover Defender Led Headlights

 

1. Projector Lens High Low Beam
   High-definition optical material, strong penetration, spotlight
2. High Brightness
   Brightness is 3 times of the halogen lamps
3. Light Sensitivity
   Light is softer to prevent from glare
4. High Energy Saving
   Reduced energy consumption by at least 50% (low energy consumption means low fuel consumption)
5. Long Lifespan
   High quality LED chips have a long lifespan which is more than 50,000 hours
6. Waterproof
   Highly sealed connector, waterproof rate IP67, anti-corrosion, protect the headlights from bad various environments
7. Die-cast Housing
   Aluminum housing, corrosion resistant, fast heat dissipation to extended lamp lifespan
8. Easy to install
   Plug and play, easy to install, does not damage the original car electrical system

 
Morsun Led Headlights are designed to use for aftermarket replacements for Jeep Wrangler and motorcycles, our high quality led headlights make sure your Jeep Wrangler and motorcycles are ready for the road and trails. These led headlights for Jeep Wrangler and motorcycles are built with shatterproof and waterproof IP67 projector lens, they can be used in a variety of environments.

We pride ourselves as one of the leading manufacturers and exporters of high quality led headlights for Jeep Wrangler and motorcycles with reasonable price.  With our high quality Jeep Wrangler led headlights our customers are getting a higher quality light output comparing with the original ones. In addition, the unique aluminum housing is designed to be waterproof, anti-corrosion and fast heat dissipation to extend the lifespan of the headlights. Our headlights have 12 months warranty which means we will provide our best service in warranty period so that you never need to worry about using our lights.
 

Quality Control

 

1. Raw material inspection
2. Chip mounting
3. Check PCB electrical parameters
4. Put heat-conducting silicone grease and PCB into the housing
5. 2 hours aging test of the semi-finished product
6. Assembled optical component dust removal and cleaning
7. Check electrical parameters and optical correction
8. Assembling lens by machine
9. Lens fixture
10. 2 hours aging test and vacuum pumping to solve inside fog problem
11. Laser logo
12. Packing and shipping

 

Exhibition