1993-1997 Ford Probe Pop Up Headlights Replacement 4X6 inch Ford Probe Led Headlights

Sku: MS-4686-Probe
4x6 inche rectangular led headlights, come with high beam low beam, dot sae approved, black / chrome color available, fits for 1993-1997 Ford Probe.
Share:
Description Review
Description
These rectangular Ford Probe pop up headlights come with 6500K color temperature which closes to natural sunlight to improve the clarity of driving view and nncrease driving comfort. Well waterproof and dustproof performance. Durable housing case with good performance heat sink. High energy density and light intensity to expand the line of vision, increase safe driving conditions for you. Our 4x6 led headlights for Ford Probe have Low consumption, efficient, energy saving and environmental protection characteristics. High power on/off response time, Long service life for more than 50000 hours. Plug and play, easy installation, usually costs you around 15 minutes for installing. Fits for 1993 1994 1995 1996 1997 Ford Probe.   
 

Specification of Ford Probe Pop Up Headlights

 
Model Number MS-4686
Brand Morsun
Car Ford
Model Probe 1993-1997
Dimension 4x6 square led headlight
High Beam 55W 3500LM
Low Beam 30W 2800LM
Halo Ring No
Color Temperature 6500K
Housing Material Die-cast aluminum housing
Housing Color Black/Chrome
Lens Material PC
Waterproof Rate IP67
Certifications IP67, CE, RoHS, DOT, SAE
Lifespan More than 50,000hrs
Warranty 12 Months

Product Images
4x6 led headlights truck4x6 led headlights for trucksIP67 Waterproof Rate 4x6 Led Headlights4x6 led headlights heat dissipation4x6 led headlights high beam and low beam4x6 led headlights Details4x6 led headlights applications
 

Fitment


1993 Ford Probe
1994 Ford Probe
1995 Ford Probe
1996 Ford Probe
1997 Ford Probe
 

Features of Ford Probe Led Headlights

 
  1. Easy to plug and play.
  2. Energy-Saving. More bright light out, less power in.
  3. 100% die-cast Aluminum housing is good to Dissipate heat.
  4. IP67, better waterproof, dispelling fog inside from breather film.
  5. we are more specialize in design & manufacture of vehicle lighting solution.
 

Advantages of 4x6 Truck Led Headlights

 
  1. Projector Lens High Low Beam
    High-definition optical material, strong penetration, spotlight
  2. High Brightness
    Brightness is 3 times of the halogen lamps
  3. Light Sensitivity
    Light is softer to prevent from glare
  4. High Energy Saving
    Reduced energy consumption by at least 50% (low energy consumption means low fuel consumption)
  5. Long Lifespan
    High quality LED chips have a long lifespan which is more than 50,000 hours
  6. Waterproof
    Highly sealed connector, waterproof rate IP67, anti-corrosion, protect the headlights from bad various environments
  7. Die-cast Housing
    Aluminum housing, corrosion resistant, fast heat dissipation to extended lamp lifespan
  8. Easy to install
    Plug and play, easy to install, does not damage the original car electrical system
 

Morsun Led Headlights are designed to use for aftermarket replacements for Jeep Wrangler, our high quality led headlights make sure your Jeep Wrangler is ready for the road and trails. These led headlights for Jeep Wrangler are built with shatterproof and waterproof IP67 projector lens, they can be used in a variety of environments.


We pride ourselves as one of the leading manufacturers and exporters of high quality led headlights for Jeep Wrangler with reasonable price.  With our high quality Jeep Wrangler led headlights our customers are getting a higher quality light output comparing with the original ones. In addition, the unique aluminum housing is designed to be waterproof, anti-corrosion and fast heat dissipation to extend the lifespan of the headlights. Our headlights have 12 months warranty which means we will provide our best service in warranty period so that you never need to worry about using our lights.
 

Quality Control


Led Headlights Quality Control from Morsun
 
  1. Raw material inspection
  2. Chip mounting
  3. Check PCB electrical parameters
  4. Put heat-conducting silicone grease and PCB into the housing
  5. 2 hours aging test of the semi-finished product
  6. Assembled optical component dust removal and cleaning
  7. Check electrical parameters and optical correction
  8. Assembling lens by machine
  9. Lens fixture
  10. 2 hours aging test and vacuum pumping to solve inside fog problem
  11. Laser logo
  12. Packing and shipping
 

Exhibition


Send your message to us