2004-2013 Harley Davidson Road Glide Daymaker Projector Headlight Black Chrome 5.75 inch Road Glide Double Led Headlight Motorcycle Accessories

Sku: MS-G2001
45w 3150lm high beam, 30w 1600lm low beam with drl, fits for Hayley Davidson road glide 2004-2013. Black chrome color available.
Share:
Description Review
Description
Die-cast aluminum housing: large slotted heat sink fins or extend the cooling surface for rapid heat removal.
High quality LED chip, extremely bright, energy saving, long life.
Easy to install: H4 Plug and Play, replace the headlight conversion kit perfectly.
The right design for heating elimination, install the headlight kits easily; the valid irradiation distance is much longer than the normal bulb.The beam pattern is perfect to increase your greater visibility.
 

Specification of Road Glide Daymaker Projector Headlight

 
Model Number MS-G2001
Brand Morsun
Car Harley
Model Road Glide
Dimension 5.75" led headlight
High Beam 45W, 3150LM
Low Beam 30W, 1600LM
Halo No
Color Temperature 6500K
Housing Material Die-cast aluminum housing
Housing Color Black/Chrome
Lens Material PC
Waterproof Rate IP67
Certifications IP67, CE, RoHS
Lifespan More than 50,000hrs
Warranty 12 Months

Product Images
5.75 inch Dual Led Headlight

5.75 inch Dual Led Headlight

5.75 inch Dual Led Headlight

5.75 inch Dual Led Headlight

5.75 inch Dual Led Headlight
 
 

Fitments

2013 Road Glide Ultra FLTRU
2013 Road Glide Custom FLTRX
2013 CVO Road Glide Custom FLTRXSE2
2012 Road Glide Ultra FLTRU
2012 Road Glide Custom FLTRX
2012 CVO Road Glide Custom FLTRXSE
2011 Road Glide Ultra FLTRU
2011 Road Glide Custom FLTRX
2011 CVO Road Glide Ultra FLTRUSE
2010 Road Glide Custom FLTRX
2009 Road Glide FLTR
2009 CVO Road Glide FLTRSE3
2008 Road Glide FLTR
2007 Road Glide FLTR
2006 Road Glide EFI FLTRI
2005 Road Glide EFI FLTRI
2004 Road Glide EFI FLTRI
   

Features

 
  • <=15 minutes installation.
  • Energy-Saving. More bright light out, less power in.
  • 100% die-cast Aluminum housing is good to Dissipate heat. 
  • IP67, better waterproof, dispelling fog inside from breather film.
   

Advantages of Road Glide Double Led Headlight

 
  1. High Performance
    High quality advanced LED chips to provide 4 times brightness than the stock light, the built-in EMC provides a brighter and softer beam, and enjoys safe driving with our LED headlight
  2. High Energy Saving
    Reduced energy consumption by at least 50% (low energy consumption means low fuel consumption)
  3. Long Lifespan
    High quality LED chips have a long lifespan which is more than 50,000 hours
  4. Waterproof
    Highly sealed connector, waterproof rate IP67, anti-corrosion, protect the headlights from bad various environments
  5. Die-cast Housing
    Aluminum housing, corrosion resistant, fast heat dissipation to extended lamp lifespan
  6. Easy to install
    Plug and play, easy to install, does not damage the original car electrical system

Morsun Led Headlights are designed to use for aftermarket replacements for Jeep Wrangler and motorcycles, our high quality led headlights make sure your Jeep Wrangler and motorcycles are ready for the road and trails. These led headlights for Jeep Wrangler and motorcycles are built with shatterproof and waterproof IP67 projector lens, they can be used in a variety of environments.

We pride ourselves as one of the leading manufacturers and exporters of high quality led headlights for Jeep Wrangler and motorcycles with reasonable price.  With our high quality Jeep Wrangler led headlights our customers are getting a higher quality light output comparing with the original ones. In addition, the unique aluminum housing is designed to be waterproof, anti-corrosion and fast heat dissipation to extend the lifespan of the headlights. Our headlights have 12 months warranty which means we will provide our best service in warranty period so that you never need to worry about using our lights.
 

Quality Control


Led Headlights Quality Control from Morsun
 
  1. Raw material inspection
  2. Chip mounting
  3. Check PCB electrical parameters
  4. Put heat-conducting silicone grease and PCB into the housing
  5. 2 hours aging test of the semi-finished product
  6. Assembled optical component dust removal and cleaning
  7. Check electrical parameters and optical correction
  8. Assembling lens by machine
  9. Lens fixture
  10. 2 hours aging test and vacuum pumping to solve inside fog problem
  11. Laser logo
  12. Packing and shipping
 

Exhibition


Exhibition of Morsun
Send your message to us