Our Jeep Cherokee XJ Led Headlights come with 6500K color temperature which closes to natural sunlight to improve the clarity of driving view and increase driving comfort. Well waterproof and dustproof performance. Durable housing case with good performance heat sink. High energy density and light intensity to expand the line of vision, increase safe driving conditions for you. Our 5x7 Led Projector Headlights have Low consumption, efficient, energy saving and environmental protection characteristics. High power on/off response time, Long service life for more than 50000 hours. Plug and play, easy installation, usually costs you around 15 minutes for installing. Fits for Jeep Wrangler Jeep Cherokee XJ 1984-2001, Jeep Wrangler YJ 1987-1995.
Specification of Jeep Cherokee XJ Led Headlights
||5x7 square led headlight
||High beam, low beam, white drl, amber turn signals
||Die-cast aluminum housing
||IP67, CE, RoHS
||More than 50,000hrs
Features of Jeep Cherokee XJ Led Headlights
Just Plug and play, Installation finished within 15 minutes.
Important Notice: Some modification to the headlight bucket may be required if the back of your headlight has limited space, but on most car, they are plug and play and will only take you 15 minutes to install with basic hand tools.
We have great power managing to power these chips,giving them enough power to light up while avoiding too much power to burning these chips. Stable performance and long life span come from this.
Low beam: 54w ( 1*24w 7375 chip + 2*15w 1860 chip, chip brand: ETI )
High beam: 78w ( 2*24w 7375 chip + 2*15w 1860 chip, chip brand: ETI )
Breathing valve are designed inside the lamp to facilitate the exchange of hot and cold gases between the inside and outside of the lamp to realize heat dissipation and balance the internal and external air pressure of the lamp. It also can prevent dust and water enter inside of the lamp.
Rectangular Die-cast Aluminum Housing to instead of the plastic housing that is common use in the market to help the headlight with a better heat sink system. We also have A aluminum heat sink inside of lamp housing, so totally we have double heat sink systems to support this product has a better performance during usage.
Transparent outside lens with scratch-resistant coating and UV resistant costing to protect the product and keep it has a long lifespan.
Advantages of 5x7 Led Projector Headlights
- Projector Lens High Low Beam
High-definition optical material, strong penetration, spotlight
- High Brightness
Brightness is 3 times of the halogen lamps
- Light Sensitivity
Light is softer to prevent from glare
- High Energy Saving
Reduced energy consumption by at least 50% (low energy consumption means low fuel consumption)
- Long Lifespan
High quality LED chips have a long lifespan which is more than 50,000 hours
Highly sealed connector, waterproof rate IP67, anti-corrosion, protect the headlights from bad various environments
- Die-cast Housing
Aluminum housing, corrosion resistant, fast heat dissipation to extended lamp lifespan
- Easy to install
Plug and play, easy to install, does not damage the original car electrical system
Morsun Led Headlights are designed to use for aftermarket replacements for Jeep Wrangler and motorcycles, our high quality led headlights make sure your Jeep Wrangler and motorcycles are ready for the road and trails. These led headlights for Jeep Wrangler and motorcycles are built with shatterproof and waterproof IP67 projector lens, they can be used in a variety of environments.
We pride ourselves as one of the leading manufacturers and exporters of high quality led headlights for Jeep Wrangler and motorcycles with reasonable price. With our high quality Jeep Wrangler led headlights our customers are getting a higher quality light output comparing with the original ones. In addition, the unique aluminum housing is designed to be waterproof, anti-corrosion and fast heat dissipation to extend the lifespan of the headlights. Our headlights have 12 months warranty which means we will provide our best service in warranty period so that you never need to worry about using our lights.
- Raw material inspection
- Chip mounting
- Check PCB electrical parameters
- Put heat-conducting silicone grease and PCB into the housing
- 2 hours aging test of the semi-finished product
- Assembled optical component dust removal and cleaning
- Check electrical parameters and optical correction
- Assembling lens by machine
- Lens fixture
- 2 hours aging test and vacuum pumping to solve inside fog problem
- Laser logo
- Packing and shipping