This led headlights come with 6000K color temperature which closes to natural sunlight to improve the clarity of driving view and nncrease driving comfort. Well waterproof and dustproof performance. Durable housing case with good performance heat sink. High energy density and light intensity to expand the line of vision, increase safe driving conditions for you. Our headlights have Low consumption, efficient, energy saving and environmental protection characteristics. High power on/off response time, Long service life for more than 50000 hours. Plug and play, easy installation, usually costs you around 15 minutes for installing. Fits for all Sportsters, Harley-Davidson and Triumph motorcycles with 5.75 inch led headlight.
Features
- 5.75" led headlight with black/chrome backplate
- Equip with two "D" shaped optical lenses, three beam lenses and one low beam lens
- Low beam pattern remains on at all times, and the switched high beam adds additional punch down the middle of the road
- Headlight is DOT SAE Emark compliant
Specification of 5.75 inch Led Motorcycle Headlight
Model Number |
MS-0057 |
Brand |
Morsun |
Car |
Harley |
Model |
Davidson, Sportsters |
Dimension |
5 3/4 inch led headlight |
High Beam |
45W 3250LM |
Low Beam |
30W 2250LM |
DRL |
No |
Color Temperature |
6500K |
Housing Material |
Die-cast aluminum housing |
Housing Color |
Black/Chrome |
Lens Material |
PC |
Waterproof Rate |
IP67 |
Certifications |
IP67, CE, RoHS, DOT |
Lifespan |
More than 50,000hrs |
Warranty |
12 Months |
Product ImagesFitmentFor all Sportsters with 5 3/4" headlights 06-'11 VRSCD and VRSCDX
15-later XG
04-later XL
09-'13 XR
91-later Dyna (except FLD and '05- earlier FXDWG)
84-'99 FXSTS and FLSTS
00-later FXCW/C, FXS, FXSB, FXSBSE, FXST, FXSTB, FXSTC and FXSTD
08-'11 FLSTSB
05-'06 FLSTSC
10-12 FLSTSE models
For Harley-Davidson with 5.75inch LED Headlight 1996-Later XL1200C
1998-Later XL883C
1994-2008 FXDWG
2006-Later FXD, FXDL, FXDC, FXDB, FXD35, FXDSE, FXDF
1999-2000 FXR2, FXR3, FXR4
1984-1999 FXSTC
1999-Later FXST, FXSTB, FXSTC
2000-2007 FXSTD
2000-Later XL, Dyna (except FXDF), FX Softail
2005 VRSCB
For Triumph Motorcycles with 5 3/4 Inch Round LED Headlight05-'10 Speed Triple
Street Triple (Round Headlight Model)
Rocket 3/4 and Thunderbird
Victory Motorbike
15-'17 Indian Scout
17 Victory Octane
Advantages of 5.75 Led Headlight
- Projector Lens High Low Beam
High-definition optical material, strong penetration, spotlight
- High Brightness
Brightness is 3 times of the halogen lamps
- Light Sensitivity
Light is softer to prevent from glare
- High Energy Saving
Reduced energy consumption by at least 50% (low energy consumption means low fuel consumption)
- Long Lifespan
High quality LED chips have a long lifespan which is more than 50,000 hours
- Waterproof
Highly sealed connector, waterproof rate IP67, anti-corrosion, protect the headlights from bad various environments
- Die-cast Housing
Aluminum housing, corrosion resistant, fast heat dissipation to extended lamp lifespan
- Easy to install
Plug and play, easy to install, does not damage the original car electrical system
Morsun Led Headlights are designed to use for aftermarket replacements for Jeep Wrangler and motorcycles, our high quality led headlights make sure your Jeep Wrangler and motorcycles are ready for the road and trails. These led headlights for Jeep Wrangler and motorcycles are built with shatterproof and waterproof IP67 projector lens, they can be used in a variety of environments.
We pride ourselves as one of the leading manufacturers and exporters of high quality led headlights for Jeep Wrangler and motorcycles with reasonable price. With our high quality Jeep Wrangler led headlights our customers are getting a higher quality light output comparing with the original ones. In addition, the unique aluminum housing is designed to be waterproof, anti-corrosion and fast heat dissipation to extend the lifespan of the headlights. Our headlights have 12 months warranty which means we will provide our best service in warranty period so that you never need to worry about using our lights.
Quality Control
- Raw material inspection
- Chip mounting
- Check PCB electrical parameters
- Put heat-conducting silicone grease and PCB into the housing
- 2 hours aging test of the semi-finished product
- Assembled optical component dust removal and cleaning
- Check electrical parameters and optical correction
- Assembling lens by machine
- Lens fixture
- 2 hours aging test and vacuum pumping to solve inside fog problem
- Laser logo
- Packing and shipping
Exhibition